Skip to content

Serving 28 cities across Middle Tennessee Free visit and written plan

Drip & Low-Volume

Stop spraying the shrubs. Start feeding the roots.

Converting existing spray zones in beds to drip, reusing the valves and adding filters and pressure regulators, to cut waste and improve plant health.

  • Reuses: Existing valves and mainline
  • Adds: Filter, regulator, drip tubing
  • Time: Half a day to 1 day
Set a smart scheduleTry the Water-Wise Planner
Spray to Drip Irrigation Conversion in Nashville, TN by TN Irrigation in Nashville and Middle Tennessee
A cheaper upgrade than it sounds.
The overview

What it is, and why it matters.

Many existing systems water shrub beds with the same spray heads as the lawn, which wastes water and can promote disease. Converting those zones to drip reuses your valves and often your main pipe: we cap the spray risers, add a filter and pressure regulator at the valve and lay drip tubing in the bed.

We keep lawn and bed zones separate, since converting a mixed zone does not work. In Nashville, where established beds around older homes often get overspray from lawn heads, conversion plus a few nozzle changes can fix both problems in a day.

Why homeowners choose it

Four things done right.

Reuses what you have

Valves and pipe stay in place.

Right components

Filter and regulator on every converted zone.

Zones separated

Lawn and beds on their own schedules.

Overspray fixed

Spray that hits siding or walks gets adjusted too.

How it goes

From first visit to spray-to-drip conversion.

  1. 01

    Review zones

    Find spray zones that serve beds.

  2. 02

    Plan conversion

    Separate any mixed zones.

  3. 03

    Convert

    Cap risers and install drip components.

  4. 04

    Test and tune

    Flush, check flow and set run times.

Where we do it

Spray-to-Drip Conversion across Middle Tennessee.

We do this work in 28 cities, from downtown Nashville to Franklin, Murfreesboro and beyond.

Good questions

Spray-to-Drip Conversion: common questions

Can I convert my existing sprinklers to drip?

Yes, for beds. We reuse the valve, add a filter and regulator and lay drip tubing. Lawn zones should stay on sprays or rotors.

Will drip save water?

Typically, because it wastes far less to evaporation and overspray. The amount depends on how the beds were watered before.

How do I get a price for spray-to-drip conversion?

Fill in the form or call 615-431-3789. We schedule a free visit, measure and test your system or yard and send a written proposal that lists exactly what is included.

Ready to talk about spray-to-drip conversion?

A free visit and a written proposal. A real person calls back, usually the same day.

Free estimate

Let's put every drop to work.

Tell us what you are picturing. A real person reads every message and calls back, usually the same day, with straight answers and a written proposal.

  • A friendly visit at your property, with pressure and flow tests and a look at your yard
  • Honest advice on zones, heads, controllers and what will really work
  • A written proposal, with your Zone Planner numbers built in
Prefer to talk? Call or text615-431-3789

Your free estimate

We only use your details to respond to your request.